PowerPack 20K As An OTG to USB 2.0 Adapter for Android Phones?

Yes, it'll work. Please follow the steps below:

  • Connect your Android phone (Pixel / 2 / 3 | XL, Samsung Galaxy S9 / S8 / Note9 / Note8, etc.) to the USB-C port on the PowerPack 20k. 
  • Double-press the side button on the PowerPack 20k to start the USB 2.0 mode. The blue light next to the button will turn on.
  • Insert a USB flash drive or external hard drive into one of the two USB-A ports on the PowerPack 20k.
  • When you're done, eject your USB flash drive or external hard drive from the phone.
  • Unplug the USB cable.
  • Press the side button on the PowerPack 20k to exit the USB hub mode.
OTG adapter

← Older Post Newer Post →

Leave a comment

Please note, comments must be approved before they are published